PHP Internals Book

Building PHP extensions

«  Building PHP   ::   Contents   ::   Zvals  »

Building PHP extensions

Now that you know how to compile PHP itself, we’ll move on to compiling additional extensions. We’ll discuss how the build process works and what different options are available.

Loading shared extensions

As you already know from the previous section, PHP extensions can be either built statically into the PHP binary, or compiled into a shared object (.so). Static linkage is the default for most of the bundled extensions, whereas shared objects can be created by explicitly passing --enable-EXTNAME=shared or --with-EXTNAME=shared to ./configure.

While static extensions will always be available, shared extensions need to be loaded using the extension or zend_extension ini options [1]. Both options take either an absolute path to the .so file or a path relative to the extension_dir setting. (Relative paths for zend_extension are only available as of PHP 5.5, previously you always had to use an absolute path.)

As an example, consider a PHP build compiled using this configure line:

~/php-src> ./configure --prefix=$HOME/myphp \
                       --enable-debug --enable-maintainer-zts \
                       --enable-opcache --with-gmp=shared

In this case both the opcache extension and GMP extension are compiled into shared objects located in the modules/ directory. You can load both either by changing the extension_dir or by passing absolute paths:

~/php-src> sapi/cli/php -dzend_extension=`pwd`/modules/opcache.so \
                        -dextension=`pwd`/modules/gmp.so
# or
~/php-src> sapi/cli/php -dextension_dir=`pwd`/modules \
                        -dzend_extension=opcache.so -dextension=gmp.so

During the make install step both .so files will be moved into the extension directory of your PHP installation, which you may find using the php-config --extension-dir command. For the above build options it will be /home/myuser/myphp/lib/php/extensions/no-debug-non-zts-MODULE_API. This value will also be the default of the extension_dir ini option, so you won’t have to specify it explicitly and can load the extensions directly:

~/myphp> bin/php -dzend_extension=opcache.so -dextension=gmp.so

This leaves us with one question: Which mechanism should you use? Shared objects allow you to have a base PHP binary and load additional extensions through the php.ini. Distributions make use of this by providing a bare PHP package and distributing the extensions as separate packages. On the other hand, if you are compiling your own PHP binary, you likely don’t have need for this, because you already know which extensions you need.

As a rule of thumb, you’ll use static linkage for the extensions bundled by PHP itself and use shared extensions for everything else. The reason is simply that building external extensions as shared objects is easier (or at least less intrusive), as you will see in a moment. Another benefit is that you can update the extension without rebuilding PHP.

[1]We’ll explain the difference between a “normal” extension and a Zend extension later in the book. For now it suffices to know that Zend extensions are more “low level” (e.g. opcache or xdebug) and hook into the workings of the Zend Engine itself.

Installing extensions from PECL

PECL, the PHP Extension Community Library, offers a large number of extensions for PHP. When extensions are removed from the main PHP distribution, they usually continue to exist in PECL. Similarly many extensions that are now bundled with PHP were previously PECL extensions.

Unless you specified --without-pear during the configuration stage of your PHP build, make install will download and install PECL as a part of PEAR. You will find the pecl script in the $PREFIX/bin directory. Installing extensions is now as simple as running pecl install EXTNAME, e.g.:

~/myphp> bin/pecl install apcu-4.0.2

This command will download, compile and install the APCu extension. The result will be a apcu.so file in your extension directory, which can then be loaded by passing the extension=apcu.so ini option.

While pecl install is very handy for the end-user, it is of little interest to extension developers. In the following, we’ll describe two ways to manually build extensions: Either by importing it into the main PHP source tree (this allows static linkage) or by doing an external build (only shared).

Adding extensions to the PHP source tree

There is no fundamental difference between a third-party extension and an extension bundled with PHP. As such you can build an external extension simply by copying it into the PHP source tree and then using the usual build procedure. We’ll demonstrate this using APCu as an example.

First of all, you’ll have to place the source code of the extension into the ext/EXTNAME directory of your PHP source tree. If the extension is available via git, this is as simple as cloning the repository from within ext/:

~/php-src/ext> git clone https://github.com/krakjoe/apcu.git

Alternatively you can also download a source tarball and extract it:

/tmp> wget http://pecl.php.net/get/apcu-4.0.2.tgz
/tmp> tar xzf apcu-4.0.2.tgz
/tmp> mkdir ~/php-src/ext/apcu
/tmp> cp -r apcu-4.0.2/. ~/php-src/ext/apcu

The extension will contain a config.m4 file, which specifies extension-specific build instructions for use by autoconf. To incorporate them into the ./configure script, you’ll have to run ./buildconf again. To ensure that the configure file is really regenerated, it is recommended to delete it beforehand:

~/php-src> rm configure && ./buildconf --force

You can now use the ./config.nice script to add APCu to your existing configuration or start over with a completely new configure line:

~/php-src> ./config.nice --enable-apcu
# or
~/php-src> ./configure --enable-apcu # --other-options

Finally run make -jN to perform the actual build. As we didn’t use --enable-apcu=shared the extension is statically linked into the PHP binary, i.e. no additional actions are needed to make use of it. Obviously you can also use make install to install the resulting binaries.

Building extensions using phpize

It is also possible to build extensions separately from PHP by making use of the phpize script that was already mentioned in the Building PHP section.

phpize plays a similar role as the ./buildconf script used for PHP builds: First it will import the PHP build system into your extension by copying files from $PREFIX/lib/php/build. Among these files are acinclude.m4 (PHP’s M4 macros), phpize.m4 (which will be renamed to configure.in in your extension and contains the main build instructions) and run-tests.php.

Then phpize will invoke autoconf to generate a ./configure file, which can be used to customize the extension build. Note that it is not necessary to pass --enable-apcu to it, as this is implicitly assumed. Instead you should use --with-php-config to specify the path to your php-config script:

/tmp/apcu-4.0.2> ~/myphp/bin/phpize
Configuring for:
PHP Api Version:         20121113
Zend Module Api No:      20121113
Zend Extension Api No:   220121113

/tmp/apcu-4.0.2> ./configure --with-php-config=$HOME/myphp/bin/php-config
/tmp/apcu-4.0.2> make -jN && make install

You should always specify the --with-php-config option when building extensions (unless you have only a single, global installation of PHP), otherwise ./configure will not be able to correctly determine what PHP version and flags to build against. Specifying the php-config script also ensures that make install will move the generated .so file (which can be found in the modules/ directory) to the right extension directory.

As the run-tests.php file was also copied during the phpize stage, you can run the extension tests using make test (or an explicit call to run-tests).

The make clean target for removing compiled objects is also available and allows you to force a full rebuild of the extension, should the incremental build fail after a change. Additionally phpize provides a cleaning option via phpize --clean. This will remove all the files imported by phpize, as well as the files generated by the /configure script.

Displaying information about extensions

The PHP CLI binary provides several options to display information about extensions. You already know -m, which will list all loaded extensions. You can use it to verify that an extension was loaded correctly:

~/myphp/bin> ./php -dextension=apcu.so -m | grep apcu
apcu

There are several further switches beginning with --r that expose Reflection functionality. For example you can use --ri to display the configuration of an extension:

~/myphp/bin> ./php -dextension=apcu.so --ri apcu
apcu

APCu Support => disabled
Version => 4.0.2
APCu Debugging => Disabled
MMAP Support => Enabled
MMAP File Mask =>
Serialization Support => broken
Revision => $Revision: 328290 $
Build Date => Jan  1 2014 16:40:00

Directive => Local Value => Master Value
apc.enabled => On => On
apc.shm_segments => 1 => 1
apc.shm_size => 32M => 32M
apc.entries_hint => 4096 => 4096
apc.gc_ttl => 3600 => 3600
apc.ttl => 0 => 0
# ...

The --re switch lists all ini settings, constants, functions and classes added by an extension:

~/myphp/bin> ./php -dextension=apcu.so --re apcu
Extension [ <persistent> extension #27 apcu version 4.0.2 ] {
  - INI {
    Entry [ apc.enabled <SYSTEM> ]
      Current = '1'
    }
    Entry [ apc.shm_segments <SYSTEM> ]
      Current = '1'
    }
    # ...
  }

  - Constants [1] {
    Constant [ boolean APCU_APC_FULL_BC ] { 1 }
  }

  - Functions {
    Function [ <internal:apcu> function apcu_cache_info ] {

      - Parameters [2] {
        Parameter #0 [ <optional> $type ]
        Parameter #1 [ <optional> $limited ]
      }
    }
    # ...
  }
}

The --re switch only works for normal extensions, Zend extensions use --rz instead. You can try this on opcache:

~/myphp/bin> ./php -dzend_extension=opcache.so --rz "Zend OPcache"
Zend Extension [ Zend OPcache 7.0.3-dev Copyright (c) 1999-2013 by Zend Technologies <http://www.zend.com/> ]

As you can see, this doesn’t display any useful information. The reason is that opcache registers both a normal extension and a Zend extension, where the former contains all ini settings, constants and functions. So in this particular case you still need to use --re. Other Zend extensions make their information available via --rz though.

«  Building PHP   ::   Contents   ::   Zvals  »